Name: PX144
SKU: PX144_model

Produkto informacija

Techniniai duomenys

It is necessary to screw this profile on the wall.

Techninis brėžinys

PX144_model.DXF

PX144_model.DWG

PX144_model.pdf

PX144_model.obj

PX144_model.max

Atsisiųsti viską

Privalumai

Bendrieji produkto privalumai

Tvirti ir aukštos kokybės medžiagos. Gruntuoti gaminiai, užtikrinantys lygų ir matinį paviršių bei geresnį dažų sukibimą
Atsparūs smūgiams ir sukrėtimams
Atsparūs vandeniui
Lengvas ir paprastas montuoti
Galima dažyti be apribojimų

Bendrieji produkto privalumai

Tvirti ir aukštos kokybės medžiagos. Gruntuoti gaminiai, užtikrinantys lygų ir matinį paviršių bei geresnį dažų sukibimą
Atsparūs smūgiams ir sukrėtimams
Atsparūs vandeniui
Lengvas ir paprastas montuoti
Galima dažyti be apribojimų

Bendrieji produkto privalumai

Tvirti ir aukštos kokybės medžiagos. Gruntuoti gaminiai, užtikrinantys lygų ir matinį paviršių bei geresnį dažų sukibimą
Atsparūs smūgiams ir sukrėtimams
Atsparūs vandeniui
Lengvas ir paprastas montuoti
Galima dažyti be apribojimų

Garantija ir taisyklės

Crafted for interiors

Orac products* are thoughtfully designed and developed for indoor use, where they maintain their shape and beauty over time. To preserve their quality and finish, we recommend keeping them in interior spaces. Outdoor conditions may compromise performance. Therefore, we cannot guarantee results when used outside. If you have any questions, feel free to contact us.

*including DecoFix adhesives

Fire retardancy

Orac products are not fire retardant by default, but they can be treated with a fire retardant coating to meet European fire safety standards, certified in accordance with EN 13501-1.

Purotouch® can achieve a Bs2d0 fire classification when applied to a maximum of 25% of a wall surface. When covering up to 70% of a wall, it can reach a Cs2d0 classification. These ratings are only valid if the profiles are installed using FDP700 DecoFix Power adhesive. No additional conditions apply.

Duropolymer® is certified Bs2d0 when used on up to approximately 15% of a wall. To meet certification requirements, installation must be carried out using FDP700 DecoFix Power adhesive in combination with FF900 DecoFire Kit as a sealer. This material is not compatible with 3D wall coverings and its fire performance is determined by weight rather than by surface area. For specific applications or to calculate compliance, please contact the Orac team for guidance.

Built to Last, Designed for Life

Orac products are made with durability in mind - they’re designed to last a lifetime. They can be repainted as often as you like and are easy to touch up, making them a truly sustainable choice. Our products are made for indoor use only, where they perform at their best. For the best results, follow our installation tips and use Orac adhesives as explained in the manuals on our website.

For your peace of mind, we offer a 2-year warranty covering potential installation-related issues, which typically appear within this timeframe. If anything doesn’t look or feel right, don’t hesitate to reach out - we’re here to help.

Crafted for interiors

Orac products* are thoughtfully designed and developed for indoor use, where they maintain their shape and beauty over time. To preserve their quality and finish, we recommend keeping them in interior spaces. Outdoor conditions may compromise performance. Therefore, we cannot guarantee results when used outside. If you have any questions, feel free to contact us.

*including DecoFix adhesives

Fire retardancy

Orac products are not fire retardant by default, but they can be treated with a fire retardant coating to meet European fire safety standards, certified in accordance with EN 13501-1.

Purotouch® can achieve a Bs2d0 fire classification when applied to a maximum of 25% of a wall surface. When covering up to 70% of a wall, it can reach a Cs2d0 classification. These ratings are only valid if the profiles are installed using FDP700 DecoFix Power adhesive. No additional conditions apply.

Duropolymer® is certified Bs2d0 when used on up to approximately 15% of a wall. To meet certification requirements, installation must be carried out using FDP700 DecoFix Power adhesive in combination with FF900 DecoFire Kit as a sealer. This material is not compatible with 3D wall coverings and its fire performance is determined by weight rather than by surface area. For specific applications or to calculate compliance, please contact the Orac team for guidance.

Built to Last, Designed for Life

Orac products are made with durability in mind - they’re designed to last a lifetime. They can be repainted as often as you like and are easy to touch up, making them a truly sustainable choice. Our products are made for indoor use only, where they perform at their best. For the best results, follow our installation tips and use Orac adhesives as explained in the manuals on our website.

For your peace of mind, we offer a 2-year warranty covering potential installation-related issues, which typically appear within this timeframe. If anything doesn’t look or feel right, don’t hesitate to reach out - we’re here to help.

Crafted for interiors

Orac products* are thoughtfully designed and developed for indoor use, where they maintain their shape and beauty over time. To preserve their quality and finish, we recommend keeping them in interior spaces. Outdoor conditions may compromise performance. Therefore, we cannot guarantee results when used outside. If you have any questions, feel free to contact us.

*including DecoFix adhesives

Fire retardancy

Orac products are not fire retardant by default, but they can be treated with a fire retardant coating to meet European fire safety standards, certified in accordance with EN 13501-1.

Purotouch® can achieve a Bs2d0 fire classification when applied to a maximum of 25% of a wall surface. When covering up to 70% of a wall, it can reach a Cs2d0 classification. These ratings are only valid if the profiles are installed using FDP700 DecoFix Power adhesive. No additional conditions apply.

Duropolymer® is certified Bs2d0 when used on up to approximately 15% of a wall. To meet certification requirements, installation must be carried out using FDP700 DecoFix Power adhesive in combination with FF900 DecoFire Kit as a sealer. This material is not compatible with 3D wall coverings and its fire performance is determined by weight rather than by surface area. For specific applications or to calculate compliance, please contact the Orac team for guidance.

Built to Last, Designed for Life

Orac products are made with durability in mind - they’re designed to last a lifetime. They can be repainted as often as you like and are easy to touch up, making them a truly sustainable choice. Our products are made for indoor use only, where they perform at their best. For the best results, follow our installation tips and use Orac adhesives as explained in the manuals on our website.

For your peace of mind, we offer a 2-year warranty covering potential installation-related issues, which typically appear within this timeframe. If anything doesn’t look or feel right, don’t hesitate to reach out - we’re here to help.

Ienāc dizaina un iedvesmas pasaulē